Skip to content
EN
Contact

Science

From the crystal lattice to the harvest

This page keeps two things apart: how the Egg is built and made according to the manufacturer, and where the proof of concept lies. Each part carries its own label.

A crystal lattice: atoms linked like balls on springs. Hypersound travels through it as lattice waves.

Manufacturer’s description

Part 1

How the Egg is built and made

What follows is the manufacturer’s description of the Egg and of the process.

What is inside the Egg? The upper two thirds form a resonance chamber: air, enclosed by a wall of many layers. The lower third holds a ceramic mix of metals, quartz and rare minerals.

These materials are treated with a femtosecond laser. The laser permanently changes the crystal lattice of the metals and of crystalline silicon dioxide, the material quartz is made of. From then on, the material emits hypersound, with no power supply.

In physics, hypersound means sound waves above one gigahertz, far beyond ultrasound. They travel through crystals. Every seed passes through this field as it falls through the Egg.

The finished Egg needs no power supply and has no moving parts. Seed runs through it by gravity. The process details are the manufacturer’s proprietary know-how.

  1. metalquartz

    Starting material

    Certain metals and crystalline silicon dioxide. In both, the atoms sit in a regular crystal lattice.

  2. Femtosecond laser

    Ultrashort laser pulses treat the material. According to the manufacturer, this changes the lattice permanently.

  3. Finished device

    Before planting, seed runs through the HyperSound Egg once. No power supply, no moving parts.

Schematic drawing based on the manufacturer’s description, not to scale. The change in step 2 is drawn symbolically.

Glossary

Terms and references

Short definitions of the terms on this page. Each one links to a reference you can check.

Where hypersound sits among elastic waves

Frequency of mechanical (elastic) waves, logarithmic scale. Each step on the axis is a factor of ten.

Audible soundup to about 20 kHzUltrasound20 kHz to 1 GHzHypersound1 GHz to 1–10 THzNo elastic wavesabove 1–10 THzthe wavelength wouldreach the spacingbetween atoms10 Hz1 kHz1 MHz1 GHz1 THzHeat vibrations of every solid at room temperature (thermal phonons) span this whole rangeAudible soundup to about 20 kHzUltrasound20 kHz to 1 GHzHypersound1 GHz to 1–10 THzNo elastic wavesabove 1–10 THzthe wavelength would reachthe spacing between atoms10 Hz1 kHz1 MHz1 GHz1 THz

Heat vibrations of every solid at room temperature (thermal phonons) span this whole range

Lower limits of ultrasound and hypersound as in Cang et al., Journal of Physics D: Applied Physics 55, 193002 (2022); upper end of elastic waves (1–10 THz) as in the Great Soviet Encyclopedia, article “Hypersound” (1979).
Show the ranges as a table
Where hypersound sits among elastic waves
RangeFrequencyNote
Audible soundup to about 20 kHz
Ultrasound20 kHz to 1 GHz
Hypersound1 GHz to 1–10 THz
No elastic wavesabove 1–10 THzthe wavelength would reach the spacing between atoms
hypersound

Elastic waves, the same kind of wave as sound, with frequencies from about one gigahertz (10⁹ Hz) up to about one terahertz (10¹² Hz). Hypersound travels best in single crystals, especially at low temperatures. HyperSound with a capital S is our product name; hypersound is the physics term.

Reference: Cang, Jin, Djafari-Rouhani and Fytas, “Fundamentals, progress and perspectives on high-frequency phononic crystals”, Journal of Physics D: Applied Physics 55, 193002 (2022), open access(opens external site)

phonon

A unit of vibrational energy in a crystal. The atoms of a crystal sit in a regular lattice and behave as if linked by tiny springs, so heat or outside forces make the lattice vibrate. These vibrations carry heat and sound through the material. In quantum physics a packet of such vibration is treated as a particle, the phonon, much as a photon is a packet of light.

Reference: Encyclopaedia Britannica, article “phonon”(opens external site)

femtosecond laser

A laser that emits light in pulses lasting femtoseconds. One femtosecond is 10⁻¹⁵ s, a millionth of a billionth of a second. Such short, intense pulses can process a wide range of materials, including metals, glasses and crystals, and are used in industry for micromachining, cutting and marking.

Reference: RP Photonics Encyclopedia, article “Femtosecond lasers”(opens external site)

strip trial

A field comparison in which treated and untreated strips run side by side in the same field, usually planted and harvested with the farm’s own machinery. Extension guides recommend repeating each pair at least four times, placing treated and untreated strips in random order within each pair, and repeating the trial over several years.

Reference: Cornell University Cooperative Extension, Agronomy Fact Sheet 68 “On-Farm Research” (2012)(opens external site)

Proof of concept

Part 2

The proof of concept is in the harvest

The proof of concept is in the harvest: four trials in 2026, and a published study by Precision Planting. Each of these trials compares a harvest with HyperSound against an untreated control.

What the harvests show

  • Treated corn out-yielded the untreated control in 30 of 30 published comparisons since 2020.
  • A third-party trial at Precision Planting’s PTI Farm measured +6.0 bu/A in corn in 2025.
  • A variety trial on Terry Good’s farm in Ontario in 2026, measured independently by Midwest Co-op FS, found all 6 variety pairs ahead of their untreated strips.

Study facts

Seasons and locations
Most comparisons: one season at one location
Replications
Terry Good’s field plan: three per pair. PTI report pages: not stated.
Partner farms 2020–2023
Shown as published on this website
What comes next
Every season adds farms. In 2026 the Egg was at work on 5 farms in Canada and the United States; their results follow after harvest.

Test it on your own field

The strongest evidence comes from replicated strip trials on many farms over several seasons. If you want to test HyperSound on your own fields, the strip-trial guide shows how, and we are glad to help you plan it.

FAQ

Questions we get

Does it need power?

No. The device has no power supply, no cable and no battery, and it has no moving parts. Seed runs through it by gravity.

Does it wear out?

There are no moving parts, and the manufacturer describes the change in the material as permanent. The only thing you refill is the entropy cartridge: one piece of rock sugar and still water before a working day.

Is anything added to the seed?

No. The Egg adds no substance to the seed. The rock sugar stays inside the closed cartridge. Seed runs through the Egg once before planting and is then planted as usual.

Why should this work?

The manufacturer describes the working principle in part 2: laser-treated metals and quartz that emit hypersound. The proof of concept is in the harvest, so we publish every field result we can source, including the small ones, and say what each one leaves open.

Why do the results differ so much in size?

Gains in corn range from +2.3 to +20.6 bu/A. The comparisons come from different years, sites, hybrids, soils and weather, and most have few replications. Single comparisons scatter, so the range is wide. Replicated trials narrow it down.

How can I check it myself?

Run a strip trial. Plant treated and untreated strips side by side with the same hybrid, on the same day, in the same field. Repeat the pair at least three times, harvest each strip separately and compare yields at the same moisture. The strip-trial guide has the steps; send us your results.